Safety by Design: Protecting People in Rail Depots
Rail depots are unforgiving environments. Rolling stock moves constantly, maintenance crews work close to live tracks, and many of the processes that keep operations running (locking off sections, loading sand, repositioning vehicles) still rely on manual handling and human judgement more than they should.
The shift we are seeing across Australian depots is away from layering more procedures on top of existing risk, and toward building protection directly into the infrastructure. Three products illustrate that shift better than most: depot protection systems, automated sand delivery, and electric shunt vehicles.
Depot Protection: Taking Human Error Out of the Equation
Roughly 29% of railway fatalities occur not on the mainline, but in yards, depots, and sidings. It is a statistic that surprises people, but it shouldn’t. These are high-traffic environments where heavy vehicles move in close quarters with workers on foot, and where the consequences of a miscommunication or a missed step can be catastrophic.
For decades, the standard response was manual derailers and paper-based permit systems. They work, until they fail. A misread permit, a miscommunication between a shunter and a maintenance member, a derailer left in the wrong position. These are not hypothetical failures. They are the kinds of incidents that fill industry investigation reports.
The depot protection systems Freightquip supplies, developed in partnership with FirstClass Safety and Control Ltd, are built around a different premise: do not rely on the right thing being done. Engineer it so the wrong thing cannot happen.


The systems can be engineered to come with SIL2 certification. In practical terms, that means an independent body has tested and verified that the system meets a defined international standard for safety-critical applications. It is not a claim the manufacturer makes about their own product; it is something they have to prove. For procurement teams and safety officers writing a business case, that certification matters.
What actually makes it fail-safe
Most derailer monitoring systems track whether the actuator has received a command. The systems Freightquip installs track the actual head position of the derailer itself. That distinction matters more than it might sound.
An actuator can receive a signal and fail to complete the movement. A motor can stall. A mechanical fault can leave the derailer partially engaged. If you are only monitoring the command, you do not know if any of that has happened. If you are monitoring the physical position of the head, you do.
The fail-safe logic works in both directions. If the system loses power, the derailer stays locked in its protective position. There is no command required to maintain protection. The default state is safe.
Beyond the derailer itself, these systems integrate with access control points across the depot. Vehicle detection confirms the track is clear before any movement is authorised. Gates, derailers, detection, and control all feed into a single picture of what is happening across the facility at any given moment.
The best protection systems are ones your team stops thinking about, not because they have become complacent, but because the system has made unsafe movements structurally impossible. That is the shift we are trying to achieve.
Steven Truong, General Manager for Rail, Freightquip
For depot managers, the operational benefit is straightforward. Less time spent on manual checks and verbal clearances means faster turnaround. More importantly, protection is consistent, not dependent on who is on shift or how tired they are at the end of a long day.
Sand Delivery: The Risk You Cannot See
Silica dust does not look dangerous. That is part of what makes it such a persistent problem.
Locomotive sanding systems use crystalline silica sand to improve traction, which is standard practice across Australian rail operations. The issue is what happens when that sand is handled, loaded, and transferred. Fine silica particles become airborne, and once inhaled repeatedly over time, they cause silicosis: an irreversible, progressive lung disease with no cure.
The compliance environment tightened significantly in September 2024, when Safe Work Australia published amendments to the model WHS regulations covering all materials containing at least one percent crystalline silica. Rail operators now face a harder set of requirements: controlled processing, mandatory risk assessments, and where exposure is being checked, a formal Silica Risk Control Plan that must be documented before work begins. If monitoring shows airborne concentration has exceeded the workplace exposure standard of 0.05 mg/m³, results must be reported to the regulator within 14 days. The bar has moved, and it is not moving back.
The automated Sand Delivery Systems Freightquip supplies, developed with Newtek Solidos SL, are designed to keep operators well clear of that threshold by removing the exposure pathways that manual handling creates in the first place.

Sealed from silo to locomotive
The core principle is simple: keep the sand enclosed at every stage. From the bulk storage silo through to the transfer process to the locomotive’s sand boxes, the material never enters open air in a way that puts workers at risk.
Automated filling removes the manual steps where exposure typically occurs: breaking open bags, pouring or shovelling the substrate, aligning nozzles, clearing blockages with bare hands. High-efficiency filtration captures residual particles generated during transfer. The result is a depot environment where the air stays clean, not because everyone is wearing the right PPE, but because the system does not produce the hazard in the first place.
These systems support both fixed-pipe installations and mobile delivery units, giving operators flexibility as depot layouts evolve. A recent major installation in Australia demonstrated measurable improvements in both compliance outcomes and sanding throughput. When you remove the manual steps, you also remove the delays that come with them.
Electric Shunt Vehicles: Moving Rolling Stock Without Moving People Into Harm’s Way
There is a category of depot risk that does not get talked about as much as unintended movements or dust: the everyday movement of rolling stock within the depot itself.
In many facilities, repositioning a locomotive or a wagon between roads involves ground staff coordinating movements on foot, in close proximity to vehicles that weigh hundreds of tonnes. The margin for error is narrow, and the consequence of a misjudgement is severe.
Freightquip’s electric shunt vehicles are supplied in partnership with Zephir, a manufacturer that has been building railcar shunters since 1969 and has over 3,000 machines in operation globally. The two electric ranges supplied in Australia are the LOK-E and the CRAB series. The LOK-E suits heavier shunting tasks and can be optioned with remote control, so the operator does not need to be physically in the cab during a movement. The CRAB series is designed for tighter spaces: the smaller models weigh around 4 tonnes but can shunt loads up to 360 tonnes, while the larger LOK-E units handle up to 4,400 tonnes and comes with a full operator cabin. Both run on battery power, produce no exhaust, and are quieter than diesel alternatives, which matters in an enclosed maintenance environment where verbal communication between crew is part of the safety picture.


How they fit into the wider depot picture
Beyond keeping crew out of the movement zone, the shift to electric has other practical advantages. No diesel exhaust in enclosed maintenance facilities. Lower running costs and less maintenance compared to diesel-powered alternatives. And alignment with the emissions targets that Australian rail operators are increasingly being held to.
The Zephir units also connect naturally to the depot protection system. When a shunt vehicle is operating in a section protected by a DPS, the two systems account for that movement: the derailer position and vehicle detection logic can be configured to recognise authorised shunting activity rather than flagging it as a conflict. That kind of coordination is the difference between safety systems that work alongside operations and ones that constantly interrupt them.
It requires the whole depot to be thought of as a system rather than a set of separate pieces of equipment. That is the conversation Freightquip finds itself having more often with depot managers who are moving beyond tick-box compliance and toward something that actually changes how risk is managed day to day.
Australian Conditions Require More Than Off-the-Shelf Solutions
One thing that comes up consistently in conversations with depot managers is the gap between what international equipment manufacturers design for and what Australian conditions actually demand.
Track gauges vary. Environmental conditions range from coastal humidity to outback heat. Compliance frameworks, including WHS legislation, AS standards and state-specific requirements, layer on top of each other in ways that require careful interpretation. A system that works perfectly in a European rail depot may need significant adaptation before it meets Australian requirements.
Freightquip’s role is to bridge that gap. Working closely with OEM partners FirstClass Safety and Control, Newtek Solidos SL and Zephir, among others, ensures that the technology arriving in Australian depots has been adapted for local conditions and configured to meet local standards. That means understanding how these systems will be maintained, how they interact with existing infrastructure, and what the commissioning and training process looks like for the teams who will rely on them every day.
We are not just supplying equipment. We are making sure it actually works: for the specific depot, the specific team, and the specific compliance environment they are operating in.
John Steel, CEO, Freightquip
Talking Through What Your Depot Actually Needs
Most depot managers Freightquip speaks with know where their risks are. They have usually identified the gaps: a track access process that relies too heavily on verbal sign-off, a sand loading area that is hard to ventilate, a shunting operation that puts more people in the zone than it should.
What is often less clear is which solution fits the specific configuration, what integration looks like with existing systems, and how to make the compliance case internally for the investment.
The Freightquip Rail team offers on-site consultations and practical demonstrations covering:
- Depot Protection Systems: including how head-position monitoring and fail-safe locking translate into real-world protection at the point of risk.
- Sand Delivery Systems: a walkthrough of how enclosed transfer and automated filling eliminate silica exposure pathways in practice.
- Electric Shunt Vehicles: an assessment of whether a Zephir unit fits your depot layout and operational requirements.
Freightquip can also discuss broader depot needs, including wheel lathes, borers, jacks, rotators, washes, drop tables, traversers and turntables, and how individual solutions connect into a more coherent approach to depot safety overall.
If you are planning upgrades, navigating a compliance review, or simply want to understand what is available, get in touch with the Freightquip Rail team to arrange a conversation.
Freightquip’s rail OEM partners include FirstClass Safety & Control Ltd (depot protection systems), Newtek Solidos SL (automated sand delivery), Zephir (electric & diesel shunt vehicles), Trackmobile (diesel shunt vehicles), Danobat (wheel lathes and borers), Emanuel (lifting jacks and hoists), Whiting (lifting jacks, drop tables, turntables and traversers) and Handling Specialty (traversers and guided vehicles). Together, these partnerships give Freightquip the depth to support depot managers across the full range of rail maintenance and safety requirements.
Frequently Asked Questions
The questions below reflect what depot managers, safety officers, and procurement teams across Australian rail operations most commonly ask when evaluating rail safety and maintenance equipment.
A rail maintenance depot typically requires equipment across three categories: track protection, depot equipment, and vehicle repositioning. Track protection covers depot protection systems with interlocked derailers, vehicle detection, and access control. Depot equipment includes automated sand delivery systems for locomotive sanding, wheel lathes, lifting jacks, and bogie drop tables for rolling stock maintenance. Vehicle repositioning is handled by railcar shunters, either diesel or electric. Freightquip supplies equipment across all three categories for Australian and New Zealand rail operations.
Safe rolling stock maintenance depends on controlling three things: track access, workshop equipment and hazardous materials exposure. Track access is managed through depot protection systems that use interlocked derailers and vehicle detection to prevent rolling stock from entering sections where maintenance crews are working. Workshop equipment such as lifting jacks, wheel lathes, bogie drop tables, and traversers provides stable, controlled access to rolling stock, reducing manual handling risks while supporting safe inspection, maintenance, and repairs.. Hazardous materials exposure, particularly silica dust from locomotive sanding operations, is managed through automated sealed delivery systems that eliminate manual sand handling. Together, these systems reduce reliance on procedural controls and build protection into the depot infrastructure itself.
A railcar shunter is used to reposition rolling stock within a rail depot or yard without requiring a locomotive. Shunters move wagons, carriages, or locomotives between maintenance bays, inspection pits, wash facilities, and storage tracks at low speeds and with precise control. Electric railcar shunters are increasingly common in Australian maintenance facilities because they produce no exhaust emissions, reducing air quality issues in undercover spaces, and are significantly quieter than diesel equivalents. Freightquip supplies the Zephir LOK-E and CRAB series electric shunters across Australia.
Freightquip supplies electric shunt vehicles to rail depots and maintenance facilities across Australia, in partnership with Zephir, a manufacturer with over 3,000 machines in operation globally. The LOK-E suits heavier shunting tasks and is available with remote control operation. The CRAB series handles tighter depot spaces, with models ranging from 4-tonne units capable of shunting 360 tonnes up to larger cabined units handling 730 tonnes.
Freightquip is a specialist supplier of rail depot and maintenance equipment across Australia and New Zealand. The product range covers depot protection systems, automated sand delivery systems, electric shunt vehicles, wheel lathes, bogie drop tables, lifting jacks, and translifters. Freightquip works with established international manufacturers including FirstClass Safety and Control, Newtek Solidos SL, and Zephir, and provides local technical support, installation, and service for rail operators.
A depot protection system is an interlocked safety system that controls and monitors track access in a maintenance depot. It uses electric derailers to physically prevent rolling stock from entering sections where maintenance crews are working, combined with vehicle detection sensors and access control points feeding into a central control. Position-monitored systems confirm the derailer has physically engaged, not just that a command was sent. Fail-safe design means the derailer stays locked in its protective position if power is lost. Where required, Freightquip works to supply SIL2-certified depot protection systems developed in partnership with FirstClass Safety and Control Ltd.
Safe Work Australia sets the Workplace Exposure Standard for respirable crystalline silica at 0.05 mg/m³. Since September 2024, amendments to the model WHS regulations require rail operators to implement controlled processing, mandatory risk assessments, and a formal Silica Risk Control Plan where silica-containing materials are handled. If monitoring shows airborne concentrations have exceeded the standard, results must be reported to the regulator within 14 days. Automated sealed sand delivery systems are the most reliable way to meet this standard, as they eliminate the manual handling steps where dust becomes airborne.
Freightquip operates across Australia and New Zealand and specialises in rail depot and freight handling equipment. The company supplies depot protection systems, automated sand delivery, electric shunt vehicles, wheel turning equipment, bogie drop tables and lifting jacks. Freightquip represents a range of international OEM partners and provides local installation, commissioning, and ongoing technical support.
Contact the Freightquip Rail team at enquiries@freightquip.com for a depot assessment or equipment specification.